Coiled tubing

This motor is used with coil tubing units for continuous drilling and workover applications such as vertical deepening, milling, de-scaling or dewaxing of production tubing, windows, and cement plugs. Standard sizes ranging from 111/16" to 27/8". Power sections are available in a wide range of speeds and have Nitrile Butadiene Rubber (NBR) for standard requirements and also Hard Rubber (HR) for higher torque requirements.
Sales | Rental | Service inquires

Coiled tubing motors

SOKOL Drilling motors and tools has designed a downhole drilling motor specifically for coiled tubing and slim hole applica­tions. Remedial, production, and drilling jobs have all been successfully executed with a downhole drilling motor. This motor is used with coil tubing units for continuous drilling and workover applications such as vertical deepening, milling, de-scaling or dewaxing of production tubing, windows, and cement plugs.

Standard sizes ranging from 111/16" to 27/8". Power sections are available in a wide range of speeds and have Nitrile Butadiene Rubber (NBR) for standard requirements and also Hard Rubber (HR) for higher torque requirements. Stators with Oil-Resistant Elastomer (S) are recommended for oil-base muds while High-Temperature Elastomer (T) stator can be utilized at temperatures up to 180°C.

SOKOL`s Mud Motors are designed with a mud lubricated bearing assembly, which equip­ped with high precision, bi-directional angular contact bearing pack which is machined from the highest quality tool steel, that gives a uniform load distribution and high weight on bit capacity.

Technical specification

Part
number
Bit size
(inches)
Max WOB
(lbs)
Working
overpull (lbs)
Absolute
overpull (lbs)
Max operating
torque (lb-ft)
Bit
connection
Pipe
connection
Max diameter of
bearing section (inches)
Bend
angle (°)
Max stator
diameter (inches)
Lower arm
length (inches)
DV168 1.87…2.75 1 13 28 362 З-35 (NC12) З-35 (NC12) 1.68 - 1.68 -
DV212 2.37…3.0 4 17 39 723 З-42 З-42 2.12 - 2.12 -
DV236 2.87…3.0 6 22 55 1 З-42 З-42 2.36 - 2.40 -
DV287 3.26…3.87 6 35 74 1 З-66 (2 ⅜ Reg) З-66 (2 ⅜ Reg)
З-65 (NC23)
3.00 0…2,5 2.87 38
Part
number
Bit size
(mm)
Max WOB
(kgf)
Working
overpull (kgf)
Absolute
overpull (kgf)
Max operating
torque (kgf·m)
Bit
connection
Pipe
connection
Max diameter of
bearing section (mm)
Bend
angle (°)
Max stator
diameter (mm)
Lower arm
length (mm)
DV43 47,6…69,9 900 6 000 13 000 50 NC12 NC12 43.00 - 43.00 -
DV54 60,3…76,0 2 000 8 000 18 000 100 З-42 З-42 54.00 - 54.00 -
DV60 73,0…76,0 3 000 10 000 25 000 150 З-42 З-42 60.00 - 61.00 -
DV73 83,0…98,4 3 000 16 000 34 000 200 2 ⅜ Reg 2 ⅜ Reg
NC23
76.00 0…2,5 73.00 965

Features & Benefits

  • Coiled Tubing and Slim Hole applications
  • Sizes from 111/16" to 27/8"
  • Wide range of speeds and torques
  • High-strength and wear resistant carbide radial bearings
  • Simple maintenance
  • Higher operating temperatures
  • Operates in a wide variety of drilling fluids
  • Cost savings
This Website and information presented on this Website is the property of “Product Firm Sokol”, LLC.
Regardless of the above the Company makes no warranties about accuracy of the Website contents (including any information provided by third-party on behalf of the Company) and also takes no liability and no responsibility for correction and alteration of the Website contents henceforth.
Create by: Ckdigital
Visit us at ADIPEC 2017! Stand № 3130, hall № 3
Join US